Friendship Bracelet Project Using Fimo Beads

Making your own beads is incredibly therapeutic, particularly when using Fimo, as the colours are instantly impactful and ready to go. Read on to see how to make these easy Friendship Bracelets in honour of World Friendship Day which is on 30th July this year.

You will need:

Fimo – I used Fimo Professional 12 Pack – (866 370)

Fimo Magic Roller – (867 201)

Fimo Varnish – (867 217)

Sterling Silver 2 Hole Beads 8mm and 5mm – (NVQ D08 and NVQ D05)

Coloured Plastic Beads or beads of personal choice

Leather Cord 2mm – (998 1010)

Sterling Silver End Caps – (NVO 215X)

5mm Jump rings – (NVH L50)

Sterling Silver Lobster Clasp 11mm – (NVF L11)

Needle

Cocktail sticks

Round Needle File

Parallel Pliers

  • First, choose your Fimo colours and assemble your Magic Roller. The top section simply slides along the bottom one, rolling the Fimo into a uniform shape as it goes. (There is a locating piece which can be slotted into place but I found it easier without it). There are three different sections to choose from; round (12mm diameter), oval (8mm x 16mm) and bicone (10mm diameter).

  • Using your chosen colour, push a piece of Fimo through the measuring device which will enable you to section off the same amount each time. Once you have cut off the excess, push the remaining clay out of the tube with a pencil or something similarly shaped.

  • Roll into a ball, ready to place into the Magic Roller.
  • Place into the desired shape tube and position the corresponding shaped plate over the top. Then simply slide the pieces backward and forwards to roll the bead into a uniform shape.
  • Remove from the roller and push a needle through the centre of the bead to create a hole. You will find that this will distort the shape so once you have a pilot hole, place the bead back in the roller to restore the silhouette. Repeat this process a few times until the central hole is wide enough and the bead is evenly shaped. I widened the hole further using a cocktail stick to ensure it was big enough to accommodate the 2mm leather cord. Ensure you check the hole is wide enough before baking the beads
  • Place the finished beads on a cocktail stick and support on a box or cup whilst you make more.

  • Once you have perfected your method, experiment with mixing the Fimo to achieve patterned results. Just be careful not to over knead the colours or they will start to blend into one another completely.

  • Bake the beads in a low oven, for no more than 30mins following the manufacturer’s instructions. It’s a good idea to support the beads whilst they are baking. I threaded mine onto a length of silver wire which was supported on a couple of baking trays.

  • Once baked, check your threading holes again and gently widen with a needle file if required.
  • Now collect your beads together and start to play around with designs for the finished bracelets. It’s a good idea to vary colours, shapes, sizes and textures to keep things interesting. Keep in mind the recipient and tailor to their taste if possible.

  • Add a layer of Fimo Varnish to your beads if you want a glossy finish. It dries quickly so you won’t have to wait too long before they will be ready for threading. You may want to leave some matt for contrast, it’s just a matter of personal taste.
  • The overall length of the bracelet needs to include the findings as well as the cord itself, so make sure to include these when working out your measurements. These particular beads are also relatively bulky so you will need to allow a little extra length for that too. Wrist sizes vary from person to person. However, standard women’s sizes tend to be 6.5” – 7.5” whereas men are between 7.5” and 9”. Children’s sizes range from 4” – 6”. If you are still unsure you can always add a small extender chain to cover all bases.
  • Attach your end caps using parallel pliers to grip firmly, securing the ends, making sure they are flat and smooth to the touch.

  • Finally, add a jump ring and clasp to one end and another jump ring to the remaining one, to complete the bracelet. (Ensure jump rings are completely closed for security).

And there you have it, the perfect gift for a special friend.

Written by Joanna Varney

Joanna has worked in and around the jewellery industry for well over 20 years. She has designed and created her own pieces as a designer maker, as well as working in jewellery retail on a much larger scale, producing designs and NPD for some of the UK’s largest high street retailers

The post Friendship Bracelet Project Using Fimo Beads appeared first on The Bench.



source https://www.cooksongold.com/blog/fimo-jewellery-making-projects/friendship-bracelet-project-using-fimo-beads

Comments

Post a Comment

Popular posts from this blog

How To Cut And Polish Gemstones By Hand

Image
Wondering how to cut and polish gemstones by hand? Asking yourself “is it worth investing in tools for cutting and polishing gemstones”? Well, we’ve put together a selection of methods and tools for cutting and polishing gemstones without a machine. So whether you’re just getting a taste for lapidary, you’re trying to introduce it to your business, or your job involves gemstones on an everyday basis – we’ve got some ideas for you. How to cut and polish gemstones When you’re just starting out, try these techniques with a larger gemstone that has obvious flat surfaces with minimal dents, as this will make it easier to shape. And focus on creating just a few, large facets as these are easier to polish later on. How to cut gemstones by hand: using sandpaper A less technical, precise and a more free-hand way to cut and polish your gemstones – leaving out the tools is ideal for those who are just dabbling in gemstones without looking to sell just yet. Equipment: Chopping board Wet ...
Read more

Filing metals: How to file flat, square and curved surfaces

Image
Filing metal is an essential technique in jewellery making. Although simple in concept, following proven practices combined with the right filing techniques and  the right jewellery making files , ensures the job becomes a breeze. Filing metal: The basics What is a metal file used for? Filing is used in jewellery making to remove excess metal, even out surfaces, smooth or to shape, form and texture pieces. Are there specific files for certain tasks? There are several methods of filing metal and the actual  files  come in a variety of shapes, grades/cuts and sizes. The shape of the file you choose will depend on the job you are completing. For example  flat files  are used for straight edges or convex curves such as the outer edge of a disc, and  curved files  are used on concave curves such as the inside of rings. What does the “cut” of a file mean? The cut of each metal file type describes the arrangement of teeth and therefore the amount of m...
Read more

Our Top 3D Design Software: The best picks for you

Image
3D printing with Cooksongold is an incredible opportunity for creatives to unleash their imagination and produce a beautiful design that can be bought to life for you. Today’s blog in our 3D series will be the perfect guide to help any beginner or pro wanting to design, to choose the best 3D design software suited for you. While there are many different versions of free 3D modeling software available, the key is to find an efficient program that matches project requirements and provides the opportunity to make edits easily as product development moves forward. Quality 3D prints depend on a strong foundation, backed with solid designs and a growing knowledge of 3D modeling tools. Designers and engineers tend to rely on a handful of well-known 3D modeling software programs, serving as the building blocks for successful additive manufacturing of parts. Gaining skill in using 3D modeling tools takes time, and there is always room to improve and advance further as a 3D designer. Here ar...
Read more