How To Use A Jeweller’s Saw

How to Use a Jewellers SawStarting out in jewellery making? Need to brush up on your pre-existing knowledge? Either way, you’ll need to know how to use a jeweller’s saw. And this can be pretty tricky if you’re learning it for the first time. So to help you on your way, we’ve listed everything you need to know for using a jeweller’s saw – from attaching the right blades, to the correct way to use them. Find out more below.

What size jeweller’s saw blade to use

First things first, you need to use the correct size blade. Depending on the thickness of the metal you’re using, your saw blade will need to match. For thinner metals, use a blade with more teeth and vice versa. If you’d like more detail on what size jeweller’s saw blade to use, check out our Jeweller’s Saw Blades Sizing Chart.

How to put a blade in a jeweller’s saw

Now you’ve sorted the right sized blade, next up is attaching it to the saw frame.

  1. First up, you’ll need to establish the direction of the teeth – they need to face downwards when in the frame.
  2. Next, loosen the thumb screw on the top of the frame and insert the blade in between the plates with the teeth facing outwards.
  3. Once you’ve re-tightened the thumb screw, do the same with the bottom so that the blade is in place.
  4. The last step to ensure the blade is fitted properly is the sound test. Pluck the blade as you would a guitar string. If you hear a ‘twang’ – it’s not tight enough. If you hear a ‘ping’, you’re ready to start sawing.

 

Saw BladesTop tip: While tightening the bottom screw, push the frame against your workbench. This helps to make sure that the blade is fitted tightly.

How to use a jeweller’s saw to avoid breaking blades

You’ve attached your blade and you’re ready to start sawing, but there are still a few key tips to consider. Here’s how to use a jeweller’s saw to avoid breaking blades:

  • Avoid twisting the blade. This sounds fairly obvious, but it can happen without you noticing. If you’re sawing a design that has a lot of curves, make sure the blade isn’t twisting to the side as it can snap pretty easily.
  • Be careful with corners. If you’re sawing something with sharp corners, all is not lost. You can saw the corners without breaking a blade every time. All you have to do is stop when you reach the corner, continue the sawing motion without adding pressure and then gradually turn the blade.
  • Stabilise the metal with your hand. This will help to keep your metal in place so you don’t make any sudden or sharp movements with your saw.
  • Use beeswax. Another way you can prevent saw blades from breaking is by coating them in beeswax – that way the blades won’t stick to your designs.Beeswax
  • Keep checking the tension. Using the sound test mentioned previously, it’s important to keep checking that your blade is taut enough.
  • Don’t add too much pressure to the blade. Instead, hold the frame lightly and use longer, even strokes.
  • Start sawing with an indentation. Do this by just sawing upwards a few times when you begin. This will guide you in the right direction for a more accurate result.

Feeling ready to give it a go? If you feel unsure while you’re trying it, just re-read our blog on how to use a jeweller’s saw. Or check out our Tips and Tools For Cutting Sheet Metal and make sure you have all the jewellery tools and supplies you need for your projects today.

The post How To Use A Jeweller’s Saw appeared first on The Bench.



source https://www.cooksongold.com/blog/beginners-guides/how-to-use-a-jewellers-saw

Comments

Post a Comment

Popular posts from this blog

How To Cut And Polish Gemstones By Hand

Image
Wondering how to cut and polish gemstones by hand? Asking yourself “is it worth investing in tools for cutting and polishing gemstones”? Well, we’ve put together a selection of methods and tools for cutting and polishing gemstones without a machine. So whether you’re just getting a taste for lapidary, you’re trying to introduce it to your business, or your job involves gemstones on an everyday basis – we’ve got some ideas for you. How to cut and polish gemstones When you’re just starting out, try these techniques with a larger gemstone that has obvious flat surfaces with minimal dents, as this will make it easier to shape. And focus on creating just a few, large facets as these are easier to polish later on. How to cut gemstones by hand: using sandpaper A less technical, precise and a more free-hand way to cut and polish your gemstones – leaving out the tools is ideal for those who are just dabbling in gemstones without looking to sell just yet. Equipment: Chopping board Wet ...
Read more

Filing metals: How to file flat, square and curved surfaces

Image
Filing metal is an essential technique in jewellery making. Although simple in concept, following proven practices combined with the right filing techniques and  the right jewellery making files , ensures the job becomes a breeze. Filing metal: The basics What is a metal file used for? Filing is used in jewellery making to remove excess metal, even out surfaces, smooth or to shape, form and texture pieces. Are there specific files for certain tasks? There are several methods of filing metal and the actual  files  come in a variety of shapes, grades/cuts and sizes. The shape of the file you choose will depend on the job you are completing. For example  flat files  are used for straight edges or convex curves such as the outer edge of a disc, and  curved files  are used on concave curves such as the inside of rings. What does the “cut” of a file mean? The cut of each metal file type describes the arrangement of teeth and therefore the amount of m...
Read more

Our Top 3D Design Software: The best picks for you

Image
3D printing with Cooksongold is an incredible opportunity for creatives to unleash their imagination and produce a beautiful design that can be bought to life for you. Today’s blog in our 3D series will be the perfect guide to help any beginner or pro wanting to design, to choose the best 3D design software suited for you. While there are many different versions of free 3D modeling software available, the key is to find an efficient program that matches project requirements and provides the opportunity to make edits easily as product development moves forward. Quality 3D prints depend on a strong foundation, backed with solid designs and a growing knowledge of 3D modeling tools. Designers and engineers tend to rely on a handful of well-known 3D modeling software programs, serving as the building blocks for successful additive manufacturing of parts. Gaining skill in using 3D modeling tools takes time, and there is always room to improve and advance further as a 3D designer. Here ar...
Read more